Rhino AccessStep SafeStep Van Rear Step - Twin Yellow Connect+ - VW T6 Transporter 2015 on - ALL

The AccessStep (previously SafeStep) combines a solution for areas surrounding health and safety when stepping in and out of the vehicle.
Code: SS203YOE T6 Transporter 2015
  • £391.48
  • RRP £552.67
  |   Usually dispatched within 24 hours

VW T6 Transporter - 2015 on
Roof Height - H1/Low
Wheel Base - L1/Short, L2/Long
Rear Door - ALL

Rhino AccessStep (was SafeStep) Rear Step - Twin - Yellow - With Connect+ Parking Sensor Plug & Play Kit - SS203YOE
NOTES - Twin step safety step with Connect+ for integrating your vehicle's existing reverse parking sensors directly into the step.
Note: Vehicles with manufacturers/aftermarket reversing sensors will need to disconnect them as the AccessStep will interfere with the sensor operation. Some vehicles with factory fitted reversing sensors may have to revert back to the manufacturer main dealer for disconnection.

Please note - Commercial vehicles which have parking sensors already fitted will need to be disconnected. We recommend this should be carried out by a qualified auto-electrician who will need to disconnect the original parking sensors. It is therefore suggested that they contact the main dealer before any disconnection as this could affect the vehicle electronics.


Modern vans are increasingly equipped with a complex array of Advanced Driver Assistance Systems (ADAS) designed to improve safety and comfort of the user.

Until now, this has complicated installation of vital accessories including rear access steps where the vehicle is already equipped with original equipment reverse parking sensors.

Rhino Products can now offer a fully integrated solution to this requirement, its called Rhino Connect+

What is Connect+?

Rhino Connect+ allows your vehicles original equipment reversing sensors to be seamlessly integrated directly into your Rhino Products step.

Connect+ is a highly innovative solution which is compatible with many of Europes top commercial vehicles.

Making alterations to introduce an external step with parking detection technology has previously been a time-consuming process, often requiring specialist knowledge, complicated rewiring and of course, added expenditure. Connect+ neatly solves this problem by integrating each OEM sensor into the step via a simple plug and play cable.

- Seamless plug & play connection - full integration to vehicle electronics
- Fast, simple installation fitting process - considerable time savings
- No additional rewiring costs - cost effective solution
- Revolutionary design - a truly innovative system from Rhino

Whats included?

Rhino Connect+ is delivered to you as a complete kit for successful installation:

-The Rhino Products modified with special adapters
-Plug and play cabling and connectors
-4 x panel blanking plugs

Installation is quick, simple and effective. Typical installation time is 15 minutes from start to finish.

How does Connect+ work?

1 - Dismount the OEM sensors from the vehicle.
2 - Click them into place via special adapters and using rear spacers located in the step.
3 - Plug & play - reconnect the sensors, with the male plug going into the sensor and the female plug connecting to vehicles wiring harness.
4 - Fix blanking plugs to cover the space where each sensor was originally located.

The bespoke design per vehicle means AccessStep (previously SafeStep) is set to the most optimum height and complements the aesthetics of the vehicle.
Coated in an electric paint black undercoat with a polyester powder top coat to ensure maximum corrosion resistance.
One person can easily fit
Clear and concise fitting instructions
Available in black or yellow
Available with or without reversing sensors
Twin or triple options (depending on vehicle model)
TUV approved
Safety reflective tape standard on each step
Anti-slip plastic tread plates (non-slip even in wet/frozen conditions)
Manufactured from a steel frame
This anti-corrosive finish will assist preventing rusting and weathering

Enables access to the rear of the vehicle, as well as the loading/unloading of roof racks
Independently life cycle tested & TUV approved

We aim to dispatch your order as quickly as possible and therefore offer alternative services at the checkout to enable you to choose the one which best suits your requirements. If your order is time sensitive please email sales@thejourneycentre.co.uk or telephone us 0114 349 3550 to confirm the item is available before placing your order.

Some products are dispatched direct from the manufacturer’s warehouse. Please ensure you have read the DELIVERY section in our Terms and Conditions

NOTE DELIVERY TIMES: These are calculated using ‘working days’ which exclude Saturday, Sunday, Bank Holidays and Festive periods

We wish to advise you, that due to all the current problems caused by Covid - 19 in the way staff are now deployed under social distancing guidance, coupled with the huge increase in online ordering, this has put the whole system under severe pressure, and may inevitably cause some delays in achieving the usual high levels of service.
All Couriers are not guaranteeing a Next Day or Timed Service at this current time.

Whilst most of our customers are receiving their order at the arrival time expected, there have unfortunately been some slight delays with the carriers which are outside of our control.

May we therefore suggest, that should your order not arrive on the anticipated day, and you are not going to be available to receive it in the following days, that you nominate a neighbour who might accept it on your behalf?

In these circumstances it would be helpful if you could leave a clear written instruction attached to the obvious door that the driver would visit, advising of the name and house number of the chosen neighbour. 

Should this not be possible/practical then, the normal procedure of the courier company leaving a card advising you to contact them to rearrange the delivery will apply.

Thank you in anticipation of your understanding and cooperation during these most unusual and difficult times.

The Journey Centre

Via Credit/Debit card, PayPal at checkout or just call our customer services team to pay by Credit/Debit card on 0114 349 3550

Please ensure that your recorded address with your bank and credit card providers, email and telephone contact details are accurate and current, as we (or the courier company), may need to contact you regarding your delivery. (We do not pass this information to other companies)

If you are unsure please contact us

Contact us with any questions you have about this product
Fits - MakeVW
Fits - ModelT6 Transporter
Fits - Year2015 on
Fits - Wheel BaseL1/Short, L2/Long
Fits - Roof HeightH1/Low
Fits - Rear Door TypeTwin Doors, Tailgate
NotesNote: Vehicles with manufacturers/aftermarket reversing sensors will need to disconnect them as the AccessStep will interfere with the sensor operation. Some vehicles with factory fitted reversing sensors may have to revert back to the manufacturer main dealer for disconnection.
MaterialCoated Steel
Instructions ProvidedYes - with all the nuts, bolts and fittings
VAT Invoice ProvidedYes